Products

Contact Us

Your Position:   Home > Products > plastic auxiliary machine >

dehumidifier



1. Adopted P. I. D. Temperature controller, the equipment can show on screen set temperature and actual temperature.
2. Up-to-date chain-wheel transmission design with more stable performance, to avoid traditional belt's disadvantage under high temperature.
3. Double condensors structure to ensure lower return air temperature and dew point.
4. The dew point of processing wind can reach -40 Centigrade. A better honeycomb is optional to use so as to make dew point reach -50 Centigrae.
5. A dew point gauge is optional to use in order to monitor dehumidifying effect anytime.
6. Equipped with emergency stop switch and protective devices of short circuit, phase-sequence, blower overload, over-heating and rotor fault etc...
7. Nice design, Polish appearance, easy to move



DEHUMIDIFIER OF PLASTIC

Technical Parameters
Model Regen.Heater Power Dry Air Flow Dimension(mm) Weight (kg) pipe size(inch)
XD-90 3.5 kw 90 m³/hr 900*520*1700 120 2"
XD-120 3.5 kw 120 m³/hr 900*620*1700 140 2"
XD-150 4 kw 150 m³/hr 1300*700*1700 215 2.5"
XD-200 5.4kw 200 m³/hr 1300*700*1700 225 2.5"
XD-300 7.2kw 300 m³/hr 1300*700*1800 240 3"
XD-400 7.2kw 400 m³/hr 1300*700*1800 280 3"
XD-500 10kw 500 m³/hr 1500*1000*1900 290 4"
XD-700 10kw 700 m³/hr 1500*1000*1900 300 4"
XD-1000H 15kw 1000 m³/hr 1500*1000*1900 400 5"

Related Tags : dehumidifier

Previous : first page Next : industrial chiller